Comments Close Nov. 20 on SBA's Plan to Measure Construction Firms by Headcount, Not Revenue: What the Proposed Size Standards Would Mean for GCs and Trade Contractors
The public has until Friday, Nov. 20, 2026, to comment on the biggest rewrite of federal small-business size standards in years. For construction, the headline change isn't a bigger number. It's a different ruler. The U.S. Small Business Administration (SBA) proposes to stop measuring most general and trade contractors by average annual revenue and start measuring them by average number of employees.
Status: PROPOSED. Nothing has changed yet. The current size table in 13 CFR 121.201 still governs every bid, offer and SAM certification until SBA publishes a final rule and it takes effect.
What SBA published, and when
On Aug. 20, 2026, SBA published two companion documents in the Federal Register:
- Small Business Size Standards (91 FR 53741, RIN 3245-AI67, Docket SBA-2026-0199), which proposes new size standards for 338 industry groups and industries; and
- Revised Size Standards Methodology (91 FR 54096, Docket SBA-2026-0265), the white paper explaining the formula behind them.
Comments were originally due Sept. 21. SBA extended both comment periods by 60 days, to Nov. 20, 2026, in a notice effective on filing Sept. 21 and published Sept. 24. The extension notice cites requests for more time. The American Subcontractors Association (ASA) says it had asked for exactly that extension, though SBA's notice doesn't name individual requesters.
The four changes that matter to contractors
The proposed rule's own text lays out the structure:
- Fewer, broader categories. Today there are size standards for 978 six-digit NAICS industries plus 18 "exceptions." SBA would collapse them into 338 standards, mostly at the four- and five-digit NAICS level, and remove all of the exceptions. Your six-digit code doesn't change. It would simply take the standard of its group.
- Employees by default. Under its 2024 methodology, SBA used revenue-based standards for industries that weren't manufacturing or services unless certain conditions applied. The new methodology "takes the opposite approach and defaults to employment-based size standards" wherever SBA has discretion. SBA says this will reduce the number of firms bouncing between small and other-than-small because of business swings, inflation and productivity growth.
- A new formula. SBA would replace seven factors with one "average market size" measure built from national industry size, the number of geographic markets and an adjustment for net imports.
- No reductions. SBA says it isn't proposing to lower any size standard that keeps the same measure.
SBA estimates that about 114,236 businesses would gain small status and fewer than 200 would lose it. Two law and consulting firms that track federal contracting, FEDCON and Williamson Law Group, report that SBA's analysis counts roughly 37,000 current federal contractors that would become newly small, holding more than 105,000 fiscal 2025 awards worth over $71 billion. Williamson Law Group also reports that SBA's Office of Advocacy put the number of newly small current contractors far lower, at 4,000 to 6,000, and that neither document explains the gap.
Construction: today's dollars vs. the proposed headcounts
The current figures below come from the size table in 13 CFR 121.201. The proposed figures appear in the rule's table, which the Federal Register prints as images. We've taken them from published breakdowns by FEDCON and BidFox and, for the finishing trades, from ASA. Check your own code against the official table on page 53745 and following before you rely on any number.
| NAICS (current code) | Industry | Current standard | Proposed standard (group) |
|---|---|---|---|
| 236115 / 236118 | New single-family housing / residential remodelers | $45.0 million | 550 employees (2361) |
| 236220 | Commercial and institutional building | $45.0 million | 600 employees (2362) |
| 237110 | Water and sewer line | $45.0 million | 700 employees (23711) |
| 237310 | Highway, street and bridge | $45.0 million | 700 employees (2373) |
| 237990 | Other heavy and civil engineering | $45.0 million | 900 employees (per FEDCON) |
| 238110 / 238160 | Poured concrete foundation / roofing | $19.0 million | 650 employees (2381) |
| 238210 | Electrical contractors | $19.0 million | 550 employees (23821) |
| 238220 | Plumbing, heating and air-conditioning | $19.0 million | 550 employees (23822) |
| 238310–238350 | Drywall, painting, flooring, tile, finish carpentry | $19.0 million | 600 employees (2383, per ASA) |
| 238910 | Site preparation | $19.0 million | 550 employees (per FEDCON) |
One correction worth flagging: at least one published summary lists residential remodelers (236118) at $19 million today. The current federal table says $45.0 million.
How the employee count actually works
The method is in a rule that already exists, 13 CFR 121.106, and most construction firms have never had to use it:
- SBA counts everyone employed on a full-time, part-time or other basis, including workers from a temp agency, PEO or leasing company.
- The number is the average across every pay period in the preceding completed 24 calendar months.
- Part-time and temporary employees count the same as full-time employees. Seasonal peaks raise your average.
- Affiliates' employees are added in, including domestic and foreign affiliates. An acquisition during the measurement period counts for the whole period.
That's a different exercise from today's revenue test, which averages receipts over completed fiscal years. A firm can be small under one test and large under the other.
Two hypothetical firms, run both ways
These examples are ours, not SBA's, and they assume no affiliates:
- A lean electrical contractor: 140 average employees, $42 million in average receipts. Today it's well over the $19 million standard for NAICS 238210, so it isn't small. Under the proposal (550 employees), it would be small and could compete for set-asides again.
- A labor-heavy finishing contractor: 640 average employees counting seasonal and temp-agency labor, $18 million in average receipts. Today it's just under $19 million, so it's small. Under the proposed 600-employee standard for the 2383 group, it wouldn't be.
That second case is the kind of firm the "fewer than 200" estimate covers. It's also why ASA has urged SBA to show why headcount fits construction. ASA argues that two contractors with the same crew size can have "dramatically different" revenue, bonding capacity and purchasing power.
Who is pushing back, and on what
The comment record isn't quiet. Williamson Law Group reports that 13 senators, led by Sen. Edward Markey, the ranking member of the Senate small-business committee, urged SBA to rescind the proposals. ASA has listed the issues it plans to press:
- the number of construction firms that would newly qualify as small;
- converting receipts-based standards to employee counts;
- consolidating six-digit construction codes into broader groups;
- the effect on set-asides and on primes' small-business subcontracting goals; and
- whether very different trades need separate standards.
SBA's position, from the rule, is that today's standards were set in 2022 and haven't kept up with inflation. It also says excluding growing firms from small status would push consolidation in "manufacturing, construction, and IT."
What size status does, and doesn't, change
- It changes eligibility for SBA loan programs, small-business set-asides and price preferences, and whether a sub counts toward a prime's small-business goals.
- It doesn't confer 8(a), HUBZone, women-owned (WOSB) or service-disabled veteran-owned (SDVOSB) status on its own, according to Williamson Law Group.
- It doesn't touch state licensing. A newly "small" firm bidding a federal job still needs whatever state or local contractor license, and licensed qualifier, the work requires.
What to do before Nov. 20
- List every NAICS code you bid under and map each one to its proposed four- or five-digit group.
- Run your 24-month average headcount the way 13 CFR 121.106 does: every pay period, part-time and temp labor included, affiliates added.
- Compare both tests (current receipts vs. proposed employees) for each code, and flag any code where your status would flip.
- Comment with numbers at regulations.gov under Docket SBA-2026-0199 (size standards) or SBA-2026-0265 (methodology). Specific, data-backed comments carry the most weight.
- Don't change your SAM representations or certify size on an offer based on the proposal. Williamson Law Group reports that the proposal says it wouldn't apply retroactively, and the final rule may look different.
This article is for general information and isn't legal advice. Verify current requirements with your state licensing board or a licensed attorney.
IQS — connecting construction businesses with state-licensed qualifiers.
Sources
- Federal Register — Small Business Size Standards, proposed rule (Aug. 20, 2026; FR Doc. 2026-17042)
- Federal Register — Small Business Size Standards: Revised Size Standards Methodology (Aug. 20, 2026; FR Doc. 2026-17039)
- Federal Register — Comment period extension to Nov. 20, 2026 (Sept. 24, 2026; FR Doc. 2026-19546)
- SBA Office of Advocacy — SBA Extends Comment Period for Proposed Rules on Industry Size Standards (Sept. 24, 2026)
- 13 CFR 121.201 — current size standards table (LII)
- 13 CFR 121.106 — How SBA calculates number of employees (LII)
- American Subcontractors Association — SBA Extends Comment Period on Proposed Small Business Size Standards
- FEDCON — SBA Proposes New Rules on Industry Size Standards (updated Oct. 5, 2026)
- Williamson Law Group — SBA Proposes Significant Expansion of Small Business Size Standards (Oct. 9, 2026)
- BidFox — SBA wants to change who counts as small in 338 industries
- Regulations.gov — Docket SBA-2026-0199
Share this article
Need a licensed qualifier for your business? Request a qualifier match. Hold a license and want to qualify a company? Start here.
Follow International Qualifier Search for more on Facebook, LinkedIn, YouTube, and Instagram.
