The agency that doesn't sleep. Call (954) 860-7190 and ask Fiona, our AI assistant, anything, 24/7.

    M-F 9am-5pm EST
    Regulation Watch

    New Jersey Bills Would Bar Subcontractors From Working Under a Prime Contractor's Trade License: What A5574 and S4813 Propose

    IQS Editorial Team
    October 30, 2026
    8 min read

    Status: PROPOSED. Neither bill has had a committee vote, and nothing in them is law today.

    Two identical bills in Trenton would close what their sponsors call a gap in New Jersey's trade licensing law: subcontractors doing licensed work under somebody else's license.

    Assemblywoman Dawn Fantasia (R-24) introduced A5574, the "Subcontractor Licensing Enforcement Act," on Oct. 5, 2026. The Legislative Digest for that day shows it was referred to the Assembly Regulated Professions Committee. On Oct. 15, Sen. Parker Space, from the same district, introduced the same text in the Senate as S4813. As of this writing, LegiScan lists the Assembly bill as pending in committee with no further action.

    Bills like this often stall. Still, the language is worth reading now, because it would change how New Jersey prime contractors hire, document and permit trade work.

    What problem the bill says it's fixing

    The bill's findings say New Jersey licenses HVACR contracting, electrical contracting, plumbing, fire and burglar alarm installation and other specialties. They then say current law "does not clearly prohibit" subcontractors from performing regulated work under a prime contractor's license, which lets unlicensed entities "evade State oversight."

    That's the sponsors' reading of current law, not a court ruling. But anyone who has watched a licensed shop "cover" an unlicensed crew on a permit will recognize what they're describing.

    What A5574/S4813 would require

    1. Every trade sub needs its own New Jersey license. No subcontractor could perform, offer, advertise or engage in "regulated trade work" without holding the New Jersey license for that trade (Section 4a). Regulated trade work means HVACR, electrical, plumbing, fire and burglar alarm, sheet metal, and any other activity that needs a license or certification under Title 45 or the trade boards' rules.

    2. A prime's license never covers a sub. A contractor's license would not, "under any circumstance," authorize a subcontractor to do regulated work (Section 4b). Primes also couldn't hire, permit, direct or contract with a sub for licensed work unless the sub holds its own license for that trade (Section 4c).

    3. Proof of license goes to three places. Each sub would have to show proof of licensing to the prime before work starts, to the permitting authority when permits are filed, and to any state or local enforcement agency that asks (Section 4d).

    4. Permits name the sub. Every permit application for regulated work would have to list the name and license number of the subcontractor doing the work, plus "proof of the subcontractor's physical license." No permit could issue unless the named sub holds the license. Filing a permit under the prime's own license for work an unlicensed sub will do would be a violation in itself (Section 5).

    5. Three years of records. Primes would have to keep copies of each trade sub's license, contract and permit documents for three years (Section 7).

    6. Shared liability. A contractor who knowingly hires or keeps an unlicensed sub for regulated work would be jointly and severally liable for that sub's violations (Section 7).

    7. Public works changes. The bill would amend the Public Works Contractor Registration Act (P.L.1999, c.238, C.34:11-56.55). No sub could do regulated trade work on a public project unless it is licensed for the trade and listed on the bid and application documents. Public bodies and construction managers would have to verify sub licensing before awarding or approving a subcontract (Section 8).

    Proposed penalties

    Under Section 6, a violation would count as professional misconduct and grounds for discipline by the relevant licensing board. Penalties would include:

    • fines of up to $5,000 for a first offense, up to $10,000 for a second, and up to $25,000 for each one after that;
    • suspension or revocation of the contractor's or sub's license or registration; and
    • stop-work orders from state or local enforcing agencies.

    Each day a violation continues would be a separate offense.

    When it would take effect, if passed

    On the 90th day after enactment. The Division of Consumer Affairs could act early to get ready and would write the implementing rules (Sections 9–10). The bill would apply to contracts between contractors and subs "initiated or renewed" on or after the enactment date. That means sub agreements renewed after a signing date would be covered even before the 90-day clock runs out.

    How it fits with today's electrical law

    New Jersey already ties electrical businesses to a person. Under N.J.S.A. 45:5A-9, nobody may engage in business as an electrical contractor without a business permit. The business, or an officer, partner or employee "actively engaged" in it, must hold an electrical contractor's license and take "full responsibility" for inspecting and supervising the work. One licensed electrical contractor can't qualify more than one business permit.

    Earning that license takes at least five years in the business of electrical construction. Under the statute, that's one year as a Class A journeyman plus four years in a U.S. Department of Labor-approved apprenticeship. If you fail the exam, you wait six months to retake it.

    So the bill's practical effect for electrical work is simple. A sub that installs wiring would need its own qualifying licensee and business permit. It couldn't ride on the prime's.

    What contractors can do now

    While the bills sit in committee:

    • Audit your trade subs. For every HVACR, electrical, plumbing, alarm or sheet metal sub, confirm they hold their own New Jersey license in their own name. You can check through the state's online license verification.
    • Start the three-year file now. Keep a copy of each sub's license, contract and permit documents. It costs little and helps under any rule.
    • Check how your permits are filed. If your office routinely pulls permits under your license for work a sub will perform, talk to counsel about that practice now, not after a bill passes.
    • Watch the Regulated Professions Committee agenda. A hearing would be the first sign the bill is moving.

    Why qualifiers should pay attention

    If this passes, demand rises for licensed people who can qualify a trade business in their own right. A plumbing or HVAC shop that has been working as a "helper" sub would need its own licensee, and New Jersey's electrical statute already limits each licensee to one business permit. If your business needs a licensed qualifier, or you hold a New Jersey license that could qualify one full-time, IQS connects the two.

    This article is for general information and isn't legal advice. Verify current requirements with your state licensing board or a licensed attorney.

    IQS — connecting construction businesses with state-licensed qualifiers.

    Sources

    Share this article

    Need a licensed qualifier for your business? Request a qualifier match. Hold a license and want to qualify a company? Start here.

    Follow International Qualifier Search for more on Facebook, LinkedIn, YouTube, and Instagram.