Pennsylvania Now Has a Statewide Electrician License Law: What Act 108 of 2026 Means for Electrical Contractors, Their Qualifiers and Local Licenses
Status: ENACTED. Pennsylvania has passed a statewide licensing law for electricians and electrical contractors. Senate Bill 1260 (Printer's No. 2051) was approved by Gov. Josh Shapiro on Oct. 22, 2026, and became Act No. 108 of 2026 (Pa. General Assembly bill page).
The law takes effect in stages. Most of it, including the new licensing board, starts in 60 days (Dec. 21, 2026). The core rule that you must hold a license to do electrical work, the temporary-license section and the criminal penalties start in two years (Act 108 text, § 2103).
Until now, Pennsylvania had no statewide electrician license. Licensing was left to cities and townships. Rep. Ed Neilson, a third-generation electrician who said he introduced the bill five times himself, summed it up after the final vote: "In Pennsylvania, you need a license to cut someone's hair, but until now, we haven't required a statewide license to wire someone's home" (Rep. Neilson release, Oct. 21).
Here's what changed, who it covers, and what electrical businesses should do now.
How it passed
The bill's prime sponsor was Sen. Devlin Robinson (R-Allegheny). The votes, from the General Assembly's bill history:
| Step | Date | Vote |
|---|---|---|
| Senate passage | June 10, 2026 | Passed (the bill history lists 37–13 and 36–14 tallies that day) |
| House final passage (amended) | Oct. 19, 2026 | 116–87 |
| Senate concurs in House amendments | Oct. 21, 2026 | 41–9 |
| Approved by the governor (Act 108) | Oct. 22, 2026 | — |
The key dates
Section 2103 of the act sets three effective dates:
- Immediately (Oct. 22, 2026): section 2103 itself.
- In 60 days (Dec. 21, 2026): "the remainder of this act." That covers the new board, definitions, qualifications, continuing-education framework, discipline, and the municipal section.
- In two years: § 501 (the licensing requirement and the electrical-contractor rules), § 505 (reciprocity and temporary licenses) and § 702 (criminal penalties). LexCircuit's summary puts that at roughly Oct. 22, 2028 (LexCircuit).
Two more clocks run in between. The governor must nominate the board's initial professional members within 180 days (§ 301). The board must issue regulations within 18 months (§ 2102). Fees will be set by those regulations (§ 701), so no dollar amounts are final yet.
Who sits on the new board
The new State Board of Electrical Licensure will include the Commissioner of Professional and Occupational Affairs (or a designee), two public members, and eight professional members. The governor appoints the members other than the commissioner, with Senate consent:
- two electrical contractors under collective bargaining agreements and two not under them;
- two electricians under collective bargaining agreements and two not under them.
The board must meet at least four times a year (§ 301).
The license types
Act 108 creates six categories:
- Licensed electrical contractor (L.E.C.): the business-side license. Applicants must be at least 23, have completed an apprenticeship or equivalent training, pass an exam, show 10,000 hours in electrical services, and carry liability insurance in an amount the board sets.
- Licensed electrician (L.E.): at least 21, a registered apprenticeship or 8,000 hours as a licensed residential electrician, plus an exam.
- Licensed residential electrician (L.R.E.): at least 19, plus an exam. The scope covers single-family houses and apartment buildings up to four stories, certain incidental site work, and jobs with less than $10,000 in direct labor costs.
- Licensed apprentice electrician (L.A.E.): at least 16 and registered with the Department of Labor & Industry. Renewal is capped at four biennial renewals.
- Licensed probationary electrical worker: at least 17. It's a six-month license with one renewal.
- Temporary license (§ 505): for out-of-state applicants. It runs 90 to 180 days, can't be renewed, and requires passing the exam within 90 days.
The qualifier rules electrical businesses need to know
This is where Act 108 matters most to company owners. Once § 501 takes effect:
- No license, no contract. A business entity may not contract for electrical services unless it has a licensed electrical contractor (§ 501(b)).
- One company at a time. An L.E.C. may not use the license to pull permits for any business other than their primary employer. They may not manage electrical work for more than one business entity at a time (§ 501(g)).
- License numbers in public. The L.E.C. number must appear on advertisements, contracts, proposals, letterhead and vehicles. Individual licensees must carry proof of licensure on the job and show it to code officials on request (§ 501(f)).
- A grace period if your qualifier leaves. If the licensee who qualified a business changes status (the act lists "death, illness, disability or change of employer"), the business may keep operating as a licensed electrical contractor "for at least six months, but not more than one year," as long as the work is under "qualified supervision as the board deems adequate" (§ 502(j)).
- Insurance lapses have a deadline. A lapse in required insurance must be reported to the board within 30 days. The license then goes inactive (§ 504).
That six-to-twelve-month window is generous compared with many states. Arkansas, for example, gives 30 days to have a replacement qualifier in place. But the board decides what counts as "qualified supervision," and the regulations aren't written yet. Plan for the short end.
The exam waiver (grandfathering) window
Experienced electricians won't all have to sit for an exam. Under § 502(h), the board "shall grant a license… without examination" if the person applies within one year of the effective date of section 501, meets the age and character requirements, pays the fee, and shows one of these:
- For a licensed electrician: a current municipal electrician license from a Pennsylvania municipality whose requirements are "not less restrictive" than the act, or at least 10,000 hours of experience, or completion of a registered apprenticeship.
- For a licensed residential electrician: a qualifying municipal license, or at least 6,000 hours of residential experience, or completion of an apprenticeship.
- For a licensed electrical contractor: a current municipal electrical contractor license.
Since § 501 takes effect in two years, the waiver window runs for one year after that date. Start documenting hours now: pay stubs, W-2s, apprenticeship completion papers and copies of local licenses.
Continuing education
Licensees will need continuing education each two-year cycle (§ 503):
- Electrical contractors: 16 hours.
- Electricians and residential electricians: 8 hours.
Penalties
- Criminal (§ 702, effective in two years): a violation is a misdemeanor of the third degree. A first offense carries a fine of up to $2,000 or up to six months in jail. Later convictions carry $2,000 to $5,000, or six months to one year, or both.
- Civil: the board may levy a civil penalty of up to $10,000 per violation.
What happens to city and township licenses
Section 710 says a state license "shall be acceptable to a municipality… as proof of competence." It also says a municipality "may not require an individual licensed under this act to obtain an additional license." Local ordinances on the "qualifications, fitness and competence" of electricians are "preempted and superseded."
Municipalities keep the power to levy taxes and fees, require business privilege licenses unrelated to competence, issue and deny permits, enforce health and safety ordinances, and inspect electrical work.
One timing point to watch (our analysis): § 710 isn't among the sections delayed for two years, while the licensing requirement in § 501 is. How local licensing offices handle the gap is a question for the board and municipal solicitors. Don't drop a local license on your own reading of the statute.
Who's exempt
The act lists exemptions, including:
- work on your own residence or farm, or a new owner-occupied single-family home;
- replacing lamps and fuses, and plugging portable appliances into permanently installed receptacles;
- elevator work, railway and federal installations, telecommunications, and electric utilities' own systems;
- maintenance by in-house facility employees;
- shipbuilding.
Read the full list in the act before relying on an exemption.
What to do now
- Inventory your people. Note who holds which municipal license, and who has apprenticeship papers or documented hours.
- Pick your future L.E.C. Each electrical business will need one, and that person can't serve a second company.
- Plan for continuity. Decide now who would provide "qualified supervision" if your license holder left, and who could test for the L.E.C.
- Watch the board. Nominations come within 180 days, regulations within 18 months. Fees, exams and the insurance minimum will be set there.
- Update your paperwork for the license-number display rule before § 501 takes effect.
If your business will need a licensed electrical contractor under the new law, or you're an experienced electrician who could become one, IQS connects the two.
This article is for general information and isn't legal advice. Verify current requirements with your state licensing board or a licensed attorney.
IQS — connecting construction businesses with state-licensed qualifiers.
Sources
- Pennsylvania General Assembly — SB 1260 (2025–26 session), bill history: Act No. 108 of 2026, approved Oct. 22, 2026
- SB 1260, Printer's No. 2051 — full text (PDF): §§ 301, 501–505, 701–702, 710, 2102–2103
- Rep. Ed Neilson — "Neilson celebrates historic passage of statewide electrical licensing legislation" (Oct. 21, 2026)
- LexCircuit — PA SB 1260 Electrical Licensure Act summary
Share this article
Need a licensed qualifier for your business? Request a qualifier match. Hold a license and want to qualify a company? Start here.
Follow International Qualifier Search for more on Facebook, LinkedIn, YouTube, and Instagram.
