The agency that doesn't sleep. Call (954) 860-7190 and ask Fiona, our AI assistant, anything, 24/7.

    M-F 9am-5pm EST
    Qualifier 101

    Washington's Electrical Administrator, Explained: An FAQ on the One-Company Rule, the 90-Day Clock and the $53 Assignment Form

    IQS Editorial Team
    October 30, 2026
    6 min read

    *Qualifier 101 is a reconstructed category name. The brief's category list was cut off, and prior runs used this label.

    In Washington, the person who qualifies an electrical contracting company isn't necessarily an electrician. The state lets a company qualify through a master electrician or an electrical administrator, and the administrator route has no experience prerequisite at all. Here's how it works under RCW 19.28 and the Department of Labor & Industries (L&I).

    Does every electrical contractor need one?

    Yes. To get a general or specialty electrical contractor license, the applicant must designate someone holding a master electrician certificate or an administrator certificate in the matching specialty (RCW 19.28.041(5)). The contractor also posts a $4,000 bond or cash deposit (RCW 19.28.041(3)). The license runs for 24 months and costs $353.90 to apply (WAC 296-46B-909).

    What does the administrator actually do?

    Under RCW 19.28.061(5), the designated administrator or master must:

    • be a member of the firm or a supervisory employee, available during working hours;
    • make sure all electrical work complies with state installation laws and rules;
    • make sure proper safety procedures are used;
    • make sure the required labels, permits and licenses are used;
    • see that corrections ordered by an inspector get done; and
    • notify L&I in writing within 10 days if they leave the contractor.

    The statute also bars L&I from changing those duties by rule.

    Can the administrator be part-owner or an employee?

    Either one. Since July 1, 1987, an employee designated as administrator has to be a full-time supervisory employee (RCW 19.28.061(1)). A member of the firm can also serve.

    Can one administrator back two companies?

    No. "No person may concurrently qualify as master electrician or administrator for more than one contractor" (RCW 19.28.061(1)). L&I says a general administrator (AD01) can be assigned to "a single" general or specialty contractor. A specialty administrator can only be assigned to a contractor with the same specialty (L&I).

    What happens when the administrator leaves?

    The company's license is void within 90 days unless the board qualifies a replacement. If the administrator dies or is incapacitated, the window is 180 days, and the contractor must notify L&I in writing within 10 days (RCW 19.28.061(1)).

    Can an administrator do electrical work?

    Not on the certificate alone. L&I says administrators aren't certified to use the tools of the trade unless they're also certified as electricians working for an electrical contractor.

    How do you become one?

    • No prerequisites. Anyone can sit for the administrator exam. PSI gives it at its test centers with no fixed dates (L&I).
    • The exam covers safety, the state electrical code and electrical theory (RCW 19.28.051). You must pass every section within one year, and you can retake it as many times as you need (RCW 19.28.061(4)).
    • Within 90 days of your last passing score, send L&I your score reports and the fee. The original certificate is $160.
    • There's one general certificate (AD01) and 14 specialties, per L&I.

    What does it cost to assign, and to keep?

    From WAC 296-46B-909:

    • Assign or unassign to a contractor (form F503-009-000): $53.00
    • Renewal every three years (it expires on your birthday): $175.70 online or $202.20 by mail, fax or in person
    • Late renewal: $351.40 online or $404.50 otherwise

    L&I requires 24 hours of approved continuing education per renewal, including at least 8 hours of code update and 4 of RCW/WAC review. Miss your renewal or CE and the certificate automatically separates from the contractor. More than 90 days past expiration, you have to retest.

    The bottom line

    A Washington electrical contractor lives or dies on one named person: a full-time supervisory employee or member of the firm, tied to one company, with a 90-day clock if they leave. If your company needs a Washington electrical administrator or master electrician, or you hold one of those certificates and want a full-time role, IQS connects the two.

    This article is for general information and isn't legal advice. Verify current requirements with your state licensing board or a licensed attorney.

    IQS — connecting construction businesses with state-licensed qualifiers.

    Sources

    Share this article

    Need a licensed qualifier for your business? Request a qualifier match. Hold a license and want to qualify a company? Start here.

    Follow International Qualifier Search for more on Facebook, LinkedIn, YouTube, and Instagram.