The agency that doesn't sleep. Call (954) 860-7190 and ask Fiona, our AI assistant, anything, 24/7.

    M-F 9am-5pm EST
    Qualifier 101

    How to Become the Master Electrician of Record for a Texas Electrical Contractor: 5 Steps Under Occupations Code Chapter 1305

    IQS Editorial Team
    October 13, 2026
    5 min read

    Across Texas, from Dallas–Fort Worth to the Houston industrial corridor, companies keep posting the same job: a master electrician to serve as the "responsible master" behind an electrical contractor license. If you hold that license, or are close to getting it, these are the steps the Texas Electrical Safety and Licensing Act (Occupations Code Chapter 1305) puts in front of you and the company.

    Step 1: Make sure the license is actually a master license

    Under §1305.153(a), a master electrician applicant needs:

    • at least 12,000 hours of on-the-job training under a master electrician's supervision,
    • a journeyman electrician license held for at least two years, and
    • a passing score on the master electrician exam.

    Under §1305.153(b), a master may perform all electrical work, supervise electricians, and verify training hours for other license applicants. Journeyman, residential wireman and maintenance electrician licenses don't carry that authority.

    Step 2: Understand the one-contractor rule

    This is the line that shapes every deal. Under §1305.159(b), a master electrician "may only be assigned to a single electrical contractor, unless the master electrician owns more than 50 percent" of the business.

    So unless you own a majority of the company, you can back one electrical contractor at a time. Price the arrangement with that in mind. A company asking for your license is asking for your only non-owner slot.

    Step 3: Check what the company itself must carry

    The master's license isn't enough by itself. Under §1305.159(a), the electrical contractor applicant must also:

    • show financial responsibility in the way TDLR prescribes, and
    • carry workers' compensation coverage through an authorized insurer or self-insurance, or formally elect not to carry it under Labor Code Chapter 406.

    Before your name goes on the application, ask for proof of both.

    Step 4: Confirm the work isn't exempt, or that it is

    Section 1305.003 lists 23 exemptions. Two catch people out:

    • Traffic signals and intelligent transportation systems are exempt only when the system is "controlled by a governmental entity" (§1305.003(a)(10)). A private contractor installing signals for a city should confirm with TDLR whether its scope falls inside or outside that exemption.
    • Low-voltage work such as Class 1, 2 and 3 remote-control and signaling circuits, fire alarm circuits, and fiber and communications cabling is exempt under §1305.003(a)(12).

    If a company's work is mostly exempt, it may need a different license setup than it thinks.

    Step 5: Run the compliance basics from day one

    • Truck lettering: Under §1305.166, an electrical contractor must display its business name and license number on both sides of every vehicle it owns, in letters at least two inches high and in a contrasting color.
    • Renewals: Licenses expire annually under §1305.167, on December 31 unless TDLR rules set staggered dates. TDLR must mail a renewal notice at least 30 days before expiration.
    • Local rules: Cities can require inspections and local amendments to the electrical code. Under §1305.201, though, they can't make a state-licensed electrician take a municipal exam or charge a state licensee a registration fee. Building permit fees still apply.
    • Penalties: Performing electrical work without a license, or employing someone who doesn't hold the license required, is a Class C misdemeanor under Chapter 1305. TDLR can also impose administrative penalties and issue cease-and-desist orders (§§1305.301–.302).

    The takeaway

    In Texas, the master electrician is the license behind the company, and the law lets a non-owner master back only one company. Both sides should treat the arrangement as a real working relationship: written, priced for the risk, and backed by the company's own insurance and financial responsibility.

    If you're a Texas master electrician open to that role, or a company that needs one, IQS matches licensed qualifiers with contractor businesses for a fee. It doesn't process licenses; TDLR does. Call (754) 354-8460 or visit internationalqualifiersearch.com.

    This article is for general information and isn't legal advice. Verify current requirements with your state licensing board or a licensed attorney.

    IQS — connecting construction businesses with state-licensed qualifiers.

    Sources

    Share this article

    Need a licensed qualifier for your business? Request a qualifier match. Hold a license and want to qualify a company? Start here.

    Follow International Qualifier Search for more on Facebook, LinkedIn, YouTube, and Instagram.