Ohio's Commercial Trade License Is Assigned to One Company: An OCILB FAQ on Qualifiers, the 90-Day Rule and the $500,000 Insurance Minimum
*Qualifier 101 is a reconstructed category name. The brief's category list was cut off, and prior runs used this label.
Ohio doesn't license general contractors at the state level. For five commercial trades, though, the state's rule is strict: the license belongs to one person, and that person can assign it to just one company at a time. Here's how it works under Ohio Revised Code Chapter 4740 and the Ohio Construction Industry Licensing Board (OCILB).
Which trades does OCILB license?
Electrical, HVAC, refrigeration, plumbing and hydronics contractors (ORC 4740.01). The chapter covers commercial "construction projects" and excludes residential buildings. The Department of Commerce notes that local building departments may require the state license for residential work.
Who can get the license?
An individual applicant must (ORC 4740.06):
- be at least 18;
- be a U.S. citizen or a legal alien with valid documentation;
- have at least five years as a tradesperson in the trade, or be an Ohio-registered engineer with three years of construction business experience in the trade, or have other experience the board accepts;
- carry contractor's liability insurance in only one contracting company name. Commerce lists the minimum as $500,000; and
- pass the trade exam. Commerce also requires state and federal background checks before the exam.
If you fail, you can retest after 60 days. After five failed attempts, you have to reapply.
How does the license connect to a company?
When you apply, you ask OCILB to assign your license to the contracting company that employs you (ORC 4740.07(B)). OCILB then issues the license in the company's name, showing your name and position. A license that isn't assigned goes into inactive status.
That's the qualifier relationship in Ohio, even though the statute doesn't use the word. Under 4740.07(E), work the company does under the license is deemed to be done under your personal supervision, and any violation of the license terms is deemed to have been committed by you.
Can one license qualify two companies?
No. A license can be assigned to only one company at a time (4740.07(H)). You can't assign the same type of license to a second company until the first assignment ends (4740.07(F)). Commerce adds that a license goes to only one company name, with no DBAs.
Does the license holder have to be involved in the business?
Yes. Anyone who assigns a license must be "actively engaged in business" as that type of contractor and "readily available for consultation" with the company (4740.07(G)). Commerce adds that if you pull a permit, you have to be the contractor in charge and be available to meet with OCILB investigators. You also can't use your license to pull permits for unlicensed competitors.
What happens when the license holder leaves?
The contractor or the company has to notify OCILB immediately (4740.07(D)(1)). The assignment becomes invalid:
- 90 calendar days after the contractor completes a change-of-company form,
- 90 calendar days after the contractor's death, or
- sooner, if the company and the contractor agree.
Commerce says the 90 days start when OCILB gets written notice. A signed letter of release from the old company allows immediate reassignment. Without one, the license stays with the old company for 90 days. If the company has another individual's license assigned for the same trade, it can keep operating under that license (4740.07(D)(2)).
Who can work under the license?
According to Commerce, tradespeople working under your license have to be on the company's payroll and receive a W-2, or come through a nationally recognized temporary agency. Workers paid on a 1099 are independent contractors and must hold their own state license.
What about advertising and continuing education?
- Advertising: the license number must appear on every ad that includes the company name, including vehicles, business cards, letterhead and internet ads.
- Continuing education: 8 hours for a one-year renewal or 24 hours for a three-year renewal. Half of electrical CE hours must be code courses.
- Escrow: you can put the license in inactive escrow for $60 a year. You don't need CE or insurance while it's in escrow, but you'll need up to 24 hours of CE and proof of insurance to reactivate.
If your company needs an OCILB-licensed electrical, HVAC, refrigeration, plumbing or hydronics contractor, or you hold one of those licenses and want a full-time role as a company's license holder, IQS connects the two.
This article is for general information and isn't legal advice. Verify current requirements with your state licensing board or a licensed attorney.
IQS — connecting construction businesses with state-licensed qualifiers.
Sources
Share this article
Need a licensed qualifier for your business? Request a qualifier match. Hold a license and want to qualify a company? Start here.
Follow International Qualifier Search for more on Facebook, LinkedIn, YouTube, and Instagram.
