The agency that doesn't sleep. Call (954) 860-7190 and ask Fiona, our AI assistant, anything, 24/7.

    M-F 9am-5pm EST
    Regulation Watch
    NC

    North Carolina Proposes a Plumbing-License Path for Certified Well Contractors: What the 21 NCAC 50 .0306 Change Would Do (Comments Due Nov. 30)

    IQS Editorial Team
    October 28, 2026
    8 min read

    North Carolina's State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors has proposed changing who can sit for one of its narrowest licenses. The amendment to 21 NCAC 50 .0306 would let well contractors certified at Levels A, B or C qualify for the Restricted Limited Plumbing Contractor exam through an education route instead of the usual 1,500-hour experience requirement.

    To be clear: this is a PROPOSED rule, not an enacted one. The board's notice lists a proposed effective date of March 1, 2027, and written comments are open through Nov. 30, 2026.

    What the Restricted Limited Plumbing license covers

    The license class is defined in 21 NCAC 50 .0518. It's required of anyone without a full plumbing contractor license who contracts to install, repair or replace:

    • exterior building sewer piping;
    • exterior water service piping two inches in diameter or less;
    • exterior backflow preventers on water service piping of two inches or less; or
    • water filtration systems that treat or condition potable water on a distribution line or water service piping.

    The board's license definitions sheet sums it up as exterior sewer and water service work plus water filtration. In practice, that's the work that sits between the wellhead and the house.

    What the board proposes

    Today, under paragraph (j) of .0306, an applicant for this license has to document 1,500 hours of full-time experience installing, maintaining, servicing or repairing plumbing systems. Up to half can come from academic or technical training. Paragraph (k) already offers an alternate route for licensed irrigation contractors who hold a municipal backflow inspector certification or show 500 hours of related experience.

    The proposed amendment adds two more paragraphs, each tied to a filing date:

    • Applications filed on or before June 30, 2027 (new paragraph (n)). An applicant with a current, active Level A, B or C well contractor certification from the NC Department of Health and Human Services Well Commission, who has completed a 16-hour board-approved course on the plumbing codes for this license, may take the exam.
    • Applications filed on or after July 1, 2027 (new paragraph (o)). The same well contractors may sit for the exam after completing a board-approved course of at least eight hours. The board's notice says that, after that date, the education is to come through a North Carolina community college program.

    Under both paragraphs, the applicant must pass both the business and law part and the technical part of the exam. The education route replaces the experience requirement. It doesn't replace the exam.

    Why the board says it's doing this

    In the notice's "Reason for Proposed Action," the board says the change would give licensed well contractors "a pathway to obtain a restricted license" so they can extend their scope "to avoid the need for multiple contractors" without compromising public health and safety. The notice says the proposal came out of staff discussions between the plumbing board and the Well Commission about improving efficiency. It explains the two phases this way: the board-approved class comes first, and the community college program comes later, "to ensure the availability of classes."

    Who's covered and who isn't

    The Division of Public Health certifies well contractors at four levels, according to its certification levels page:

    Level What it covers (summary) Experience
    A All well contractor activities, including air or mud rotary rigs and geothermal loops 18 months
    B Most activities, such as cable tool and hollow stem auger, but not air or mud rotary 12 months
    C Grouting, abandonment, rehabilitation, well development, liners 6 months
    D Breaking the well seal for pump repair, pump installation, chlorination, disinfection 6 months

    The proposed text names Levels A, B and C only. A pump installer who holds only a Level D certification wouldn't qualify under the new paragraphs as written. That person would still need the 1,500-hour experience route.

    What it would mean on a job

    Take a typical rural service call: a new well, a pump and a water line to the house. The well contractor can drill and set the pump. Under the rule as it stands today, the exterior water service line and any filtration system on it are Restricted Limited Plumbing work, so a second licensed contractor has to handle them. A certified well contractor who passes the restricted exam could do that work too.

    Some things don't change:

    • The license stays restricted: exterior lines of two inches or less, exterior sewer, backflow preventers and filtration. Interior potable water and drain-waste-vent piping still need a Plumbing Class I or Class II contractor.
    • The exam fee rose to $150 on June 1, 2026, the board's first increase in that fee in more than 25 years, according to its Trade Talk page.
    • The same page reminds licensees that everyone working under a board licensee must be a bona fide W-2 employee. The board says 1099 workers "may not be used to perform work which requires a license from the Board."

    Dates, and one discrepancy

    • Public hearing: The rule notice lists Wednesday, Nov. 4, 2026, 8:30 a.m. at the Hampton Inn, 155 Sugarloaf Road, Hendersonville. The board's Trade Talk page says the hearing is Nov. 5 in Hendersonville. If you plan to attend, confirm the date with the board first.
    • Comment deadline: Nov. 30, 2026. Send comments to Dale Dawson, 1109 Dresser Court, Raleigh, NC 27609; (919) 875-3612; ddawson@nclicensing.org.
    • Legislative review: The notice explains that if the Rules Review Commission approves the rule and receives written objections from 10 or more people clearly asking for legislative review, the effective date follows G.S. 150B-21.3(b1) instead.
    • Proposed effective date: March 1, 2027.

    What contractors should do now

    1. Well contractors (Levels A–C): If your crews already lay service lines or install filtration, price out the 16-hour course against the June 30, 2027 date that separates the two tracks.
    2. Plumbing contractors who sub this work out: Expect some well companies to start doing it themselves. If exterior service and filtration work is a meaningful share of your revenue, that's a reason to comment.
    3. Everyone: Read the full proposed text and comment by Nov. 30. Whether you support it or have concerns, the hearing record is where the board looks.

    This article is for general information and isn't legal advice. Verify current requirements with your state licensing board or a licensed attorney.

    IQS — connecting construction businesses with state-licensed qualifiers.

    Sources

    Share this article

    Need a licensed qualifier for your business? Request a qualifier match. Hold a license and want to qualify a company? Start here.

    Follow International Qualifier Search for more on Facebook, LinkedIn, YouTube, and Instagram.