The agency that doesn't sleep. Call (954) 860-7190 and ask Fiona, our AI assistant, anything, 24/7.

    M-F 9am-5pm EST
    Regulation Watch
    MO

    Chillicothe, Missouri Rewrites Its Contractor License Classes: One "Building Contractor" License, an 80% Exam Score and the Same 30-Hour Designated Representative

    IQS Editorial Team
    November 4, 2026
    7 min read

    On Oct. 12, 2026, the City of Chillicothe, Missouri, passed Ordinance No. 2026-86, which rewrites Section 500.270 of the City Code, the section that sets contractor license classes and qualifications. The ordinance is ENACTED. Section 5 of the ordinance says it takes effect "from and after the date of its passage and approval," so the new rules already apply to anyone licensing with the city. The ordinance's signature lines list Mayor Theresa Kelly and City Clerk Amy Hess. A published meeting summary reported the council vote as 5–0.

    The change is narrow but real: fewer classes, a higher bar on the national-exam route, and an untouched designated-representative rule.

    What changed: four classes become three

    Before the ordinance, Section 500.270 (as adopted in 2012 by Ord. No. 2012-07, and as still shown in the city's online code on Nov. 4) set four classes:

    • Class A, General Contractor: any structure.
    • Class B, Residential Contractor: single-family, duplex and townhouse structures and their accessory buildings.
    • Class C: mechanical (HVAC), electrical, plumbing and fire safety equipment, licensed trade by trade.
    • Class D, Trade Contractor: permits that don't need a Class A or B, such as fence, sign, roof, concrete, excavation or demolition permits.

    Ordinance 2026-86 sets three:

    • Class B, Building Contractor: may "construct, remodel, repair and demolish any structure and buildings accessory thereto." The single-family/duplex/townhouse limit is gone, and there is no longer a Class A. As before, a Class B holder can't do HVAC, plumbing or electrical work without also holding Class C.
    • Class C: mechanical (HVAC), electrical, plumbing and fire safety equipment. A separate license is still needed for each trade.
    • Class D, Trade Contractor: permits that don't require a Class B or C. The ordinance's examples are sign, roof, concrete, excavation and demolition permits. Fence permits, listed as an example in the old text, are no longer listed.

    What changed: the qualification routes

    Every applicant still has to meet one of four routes. Two of them changed:

    Route Before (2012 text) Ordinance 2026-86
    1. City contractor exam Retesting at the City Engineer's discretion if no city license in the last 3 years Same rule, but the City Codes Officer decides
    2. National certificate of competency (Prometric, ICC Contractor Examination Services or equivalent) 70% passing score 80% passing score
    3. Bachelor's degree in engineering, architecture or construction science Unchanged Unchanged
    4. Equivalent license from another Missouri municipality, same category Unchanged Unchanged

    The score change is the one most likely to catch someone off guard if they're holding a 70-something on an ICC or Prometric exam.

    The appeal provision also changed slightly. Licensing decisions can still be appealed to the City Administrator, and the new text adds that the Mayor's designee hears the appeal when the City Administrator is absent.

    What didn't change: the designated representative

    Subsection D is carried over word for word. A firm may hold a license in its own name only if it has at least one full-time employee designated as its representative who meets the qualification requirements, and that person must spend at least 30 hours per week "carrying out meaningful supervision of the construction work of the firm."

    That is a qualifier rule in everything but name: the person whose qualification carries the license has to be on staff full-time and actually supervising.

    One drafting detail is worth a phone call. Subsection D says the representative must satisfy "one (1) of the requirements of Section 500.280(2)." In the online code, Section 500.280 is the fee schedule. The qualification routes are in Section 500.270(B). The intent looks clear, but if your firm's license depends on a designated representative, confirm with the city which standard it applies.

    What else applies to every Chillicothe contractor

    The ordinance rewrote only Section 500.270. These neighboring sections, as they appear in the online code, still apply:

    • Annual license (Section 500.250): the license year runs April 1 to March 31. Fees are due before you start work and then by April 1 each year, and they're delinquent 30 days later. The city adds a $50 penalty for each month a fee stays delinquent while a contractor works in the city. Fees aren't prorated, and licenses can't be transferred.
    • Insurance (Section 500.250): a workers' compensation certificate naming the city, or an affidavit that you're exempt under Chapter 287, RSMo. Also general liability naming the city, with completed-operations coverage and limits of at least $300,000 per occurrence and $600,000 aggregate, from a company licensed in Missouri.
    • City debts (Section 500.250): the city won't issue a license while you owe delinquent city taxes, utility bills or permit fees (good-faith disputes excepted), and it can suspend an existing license for the same reason.
    • Fees (Section 500.280): the online schedule still lists $50 for each class, including Class A and the old residential Class B. The ordinance didn't amend that section, so ask the clerk what the fee is for the new Class B.
    • Homeowner exemption (Section 500.260): an owner-occupant can work on their own single-family home without a license. An owner who builds a new home for themselves more than once in five years, or works on more than one owned house in five years, is treated as a contractor.
    • Responsibility for the permit (Section 500.270(C), carried over): the permit holder answers for all work under it, including subcontractors' work, and must schedule and attend the required inspections.

    Penalties

    Under Section 500.290, a violation is a code violation punishable on conviction by a fine of $50 to $500 per offense, and each day it continues counts as a separate offense. On top of that, the City Administrator or a designee can suspend or revoke a license on the Building Official's recommendation. Listed grounds include using a license to get a permit fraudulently, failing to get a permit or a required inspection, failing to supervise a permitted job, and failing to hire a licensed electrical, plumbing or HVAC contractor for that work.

    What to do now

    1. Re-file under the right class at renewal. If you held Class A or the old residential Class B, ask the clerk whether your license converts automatically or needs a new application.
    2. Check your exam route. If you're relying on a national certificate, confirm the score is at least 80%.
    3. Confirm your designated representative. If your firm licenses through an employee, document their full-time status and the 30 hours a week of supervision.

    If your firm needs a full-time designated representative who meets a city's standard, or you hold the credentials to be one, International Qualifier Search connects licensed professionals with contractor businesses for full-time roles. The licensing filing itself stays between you and the city.

    This article is for general information and isn't legal advice. Verify current requirements with your state licensing board or a licensed attorney.

    IQS — connecting construction businesses with state-licensed qualifiers.

    Sources

    Share this article

    Need a licensed qualifier for your business? Request a qualifier match. Hold a license and want to qualify a company? Start here.

    Follow International Qualifier Search for more on Facebook, LinkedIn, YouTube, and Instagram.