The agency that doesn't sleep. Call (954) 860-7190 and ask Fiona, our AI assistant, anything, 24/7.

    M-F 9am-5pm EST
    By the Numbers
    National

    By the Numbers: Limit Every Worker to One Trade and the Same Job Takes 28% to 62% More Workdays, a New Study of 89,620 Labor Hours Estimates (Simplar/ABC, Nov. 2026)

    IQS Editorial Team
    November 13, 2026
    5 min read

    On Nov. 12, Associated Builders and Contractors (ABC) announced new research on multiskilling, meaning workers and crews qualified to do selected tasks in more than one trade. It's Report 3 of 6 in Volume 1 of a series by researchers at the University of Kansas, the University of North Carolina at Charlotte, Arizona State University and the Simplar Foundation, with funding from ABC. Here are the numbers, and what they don't say.

    The project records

    Report 3, Schedule Duration and Labor-Curve Outcomes, is built on day-by-day labor records that contractors supplied from recent projects built with a multiskilled labor strategy:

    • 18 project records from 11 contractors
    • 14 project types in 9 states and D.C.
    • 183 workers, 10,194 worker-days and 89,620 labor hours
    • 8 of 18 were prevailing-wage projects

    How much multiskilling actually happened

    • 17.3% of all labor hours were worked outside a worker's primary trade. By project, the share ranged from 5% to 50%.
    • All 18 of 18 records had some multiskilling hours.
    • Researchers counted 80 trade combinations across 18 trades.

    If each worker were limited to one trade

    The researchers then modeled the same work as if each worker were limited to one trade:

    • 28% to 62% more workdays to finish the same work, under the report's central schedule assumption. Put the other way, the series summary says the multiskilled projects finished in about 22% to 38% fewer workdays than a one-trade workforce was estimated to need.
    • On 73% of workdays, the one-trade model showed a trade gap. ABC describes that as at least one trade lacking enough available labor.
    • 9 to 12 added workers per 100 on an average day, and 31 to 34 per 100 on the peak-demand day. "Added staffing needs on the peak-demand day were about three times the average-day need," the study says. Total peak staffing would have reached about twice the average.
    • The labor curve's peak-to-average ratio was 1.50 as recorded, against an estimated 1.96 to 2.01 for single-trade crews. The report charts a NECA threshold of 1.6 for comparison.

    The rest of the series

    The Simplar Foundation's Volume 1 summary adds:

    • In 60 observed crews, multiskilling raised the share of time spent on direct construction work by 39% and cut idle and waiting time by 68%.
    • On closely sequenced multi-trade scopes, a multiskilled workflow completed about 43% more installed work in the same production time.
    • Keeping an observed crew's work moving with one-trade workers would take about 45% to 72% more workers.

    The foundation describes the overall dataset as covering 40 site visits with fieldwork in 24 states plus D.C., 11,407 productivity observations and more than 90,000 labor hours.

    What the study doesn't claim

    The report labels its schedule results "modeled, not measured." They're estimates built from labor records, not measured delays. The records also came from contractors that already use a multiskilled strategy, so keep that in mind before comparing them with firms that don't. Its own takeaways say broader assignments must keep "specialization, verified qualifications, safety, and quality in place."

    ABC is a merit-shop trade group that funded the research, and it's using the findings to lobby. "As a new Congress prepares to take office, lawmakers now have powerful evidence to guide policies," ABC president and CEO Michael Bellaman said in the release. Read the numbers with that in mind.

    Our read

    This section is commentary. The schedule math is persuasive, but in licensed trades "multiskilled" still has to mean licensed for each task. The study itself defines multiskilling as working "within normal training, licensing, and safety rules." Check your own state's board before you cross-train. So the realistic gains are in unlicensed scopes and in cross-training licensed people. A trade gap on 73% of days is also a staffing story, and it starts with having a licensed, qualified person in place for each trade.

    This article is for general information and isn't legal advice. Verify current requirements with your state licensing board or a licensed attorney.

    Need a licensed qualifier for your business? Request a qualifier match. Hold a license and want to qualify a company? Start here.

    Follow International Qualifier Search for more: Facebook · LinkedIn · YouTube · Instagram

    Sources

    Share this article