Utah Department of Commerce — Division of Occupational & Professional Licensing (DOPL)
Visit official board websiteCore License Tiers
4 flagship general/engineering classifications — the primary licenses most Utah contractors need.
UT-E100 — General Engineering Contractor (E-100)
Utah Code § 58-55; R156-55a-301e
Statutory Scope of Work
E-100 general engineering contractors perform engineering construction — fixed works including streets, roads, power and utility plants, dams, hydroelectric plants, sewage and waste disposal plants, bridges, tunnels, overpasses, public parks, and public rights-of-way statewide. Requires specialized engineering knowledge.
Experience & Exam Prerequisites
- 2 years (4,000 hours) paid construction experience.
- Pass the E-100 trade exam and Utah Business & Law exam.
- 30-hour pre-licensure course (ABC, UHBA, or AGC).
- Exam: Utah E-100 Trade Exam
- Exam: Utah Business & Law Exam
Qualifier Role
A UT E-100 qualifier sponsors your company to perform general engineering construction statewide.
UT-B100 — General Building Contractor (B-100)
Utah Code § 58-55; R156-55a-301c
Statutory Scope of Work
B-100 general building contractors perform construction, alteration, or repair of commercial and residential buildings requiring at least 2 unrelated building trades statewide. Includes all specialty scopes under R156-55a-301w through 301al, B-200 modular installation, and swimming pools/spas.
Experience & Exam Prerequisites
- 2 years (4,000 hours) paid construction experience.
- Pass the B-100 trade exam and Utah Business & Law exam.
- 30-hour pre-licensure course.
- Exam: Utah B-100 Trade Exam
- Exam: Utah Business & Law Exam
Qualifier Role
A UT B-100 qualifier sponsors your company to perform general building construction statewide.
UT-R100 — Residential & Small Commercial Contractor (R-100)
Utah Code § 58-55; R156-55a-301h
Statutory Scope of Work
R-100 residential and small commercial contractors perform construction, fabrication, or installation of residential and small commercial structures including swimming pools, spas, and prefabricated pools statewide. Scoped to residential and small commercial work.
Experience & Exam Prerequisites
- 2 years (4,000 hours) paid construction experience.
- Pass the R-100 trade exam and Utah Business & Law exam.
- 30-hour pre-licensure course.
- Exam: Utah R-100 Trade Exam
- Exam: Utah Business & Law Exam
Qualifier Role
A UT R-100 qualifier sponsors your homebuilding company to perform residential and small commercial construction statewide.
UT-B200 — Modular Unit Installation Contractor (B-200)
Utah Code § 58-55; R156-55a-301ag
Statutory Scope of Work
B-200 modular unit installation contractors set up modular housing units, including connecting utilities from the near proximity (meter) to the manufactured housing unit and construction of foundations statewide.
Experience & Exam Prerequisites
- 2 years construction experience; pass the B-200 trade exam and Business & Law exam.
- Exam: Utah B-200 Trade Exam
- Exam: Utah Business & Law Exam
Qualifier Role
A UT B-200 qualifier sponsors your company to install modular housing statewide.
Specialty Sub-Trades
20 single-trade sub-licenses from the Utah Department of Commerce — Division of Occupational & Professional Licensing (DOPL) — each covers one specific scope of work.
General Electrical Contractor (E-200)
E-200 general electrical contractors perform all electrical installations statewide — commercial, industrial, and residential. Includes the scope of E-201 Residential Electrical and S-202 Solar Photovoltaic. Requires a master electrician qualifier.
View UT-E200 guideResidential Electrical Contractor (E-201)
E-201 residential electrical contractors perform electrical installations on residential and small commercial structures statewide. Scoped to residential electrical work; requires a residential master electrician qualifier.
View UT-E201 guideGeneral Plumbing Contractor (P-200)
P-200 general plumbing contractors perform all plumbing installations statewide — potable water, sanitary drainage, gas piping, and backflow prevention. Includes extending service from a building to the main water/sewer/gas pipeline and the P-201 residential scope. Requires a master plumber qualifier.
View UT-P200 guideResidential Plumbing Contractor (P-201)
P-201 residential plumbing contractors perform plumbing installations on residential and small commercial structures statewide. Scoped to residential plumbing; requires a residential master plumber qualifier.
View UT-P201 guideHVAC Contractor (H-100)
H-100 HVAC contractors fabricate and install warm air heating, air conditioning, and ventilating systems, and install refrigeration equipment statewide. Gas line work requires a Certified Natural Gas Technician. Includes S-354 Radon Mitigation scope. Requires a certified H-100 qualifier.
View UT-H100 guideSolar Photovoltaic Contractor (S-202)
S-202 solar photovoltaic contractors install solar PV systems and related photovoltaic equipment statewide. May subcontract electrical work to E-200 or E-201 contractors.
View UT-S202 guideCarpentry and Flooring Contractor (S-220)
S-220 carpentry and flooring contractors install wood, metal, vinyl, plastic, and composite materials for structural, non-structural, and finish carpentry; metal studs and structural shapes; flooring (laminate, tile, cement, wood); cabinets, millwork, doors, trim; and mechanical insulation of pipes, ducts, and conduits statewide.
View UT-S220 guideMasonry, Siding, Stucco, Glass & Rain Gutter Contractor (S-230)
S-230 contractors install siding, stucco, plaster, glass, rain gutters, drains, roof flashings, and metal ridges; and lay brick, block, stone, tile, marble, and masonry products statewide. Includes shower pans.
View UT-S230 guideAsphalt and Concrete Contractor (S-260)
S-260 asphalt and concrete contractors fabricate, construct, mix, batch, inject, spray, resurface, seal, and install asphalt and concrete for flatwork, paving, and overlays statewide. Includes excavation, grading, compacting, forms, reinforcing bars, and surface striping/coating.
View UT-S260 guideDrywall, Paint & Plastering Contractor (S-270)
S-270 contractors install drywall, gypsum, wallboard, lightweight metal partitions, ceiling tile and grid; apply stucco, plaster, and insulation media; and apply paint, varnish, stain, and coatings statewide.
View UT-S270 guideRoofing Contractor (S-280)
S-280 roofing contractors install asphalt, pitch, tar, felt, shakes, shingles, tile, slate, and waterproof membranes for roofs statewide. Includes roof-attached materials, roof conversions, and skylight installation.
View UT-S280 guideFoundation, Excavation & Demolition Contractor (S-310)
S-310 contractors perform excavation, foundation work, and demolition statewide, including raising, cribbing, underpinning, moving, or removal of buildings and structures.
View UT-S310 guideLandscape & Recreation Contractor (S-330)
S-330 landscape and recreation contractors install landscaping, irrigation, decorative pools, retaining walls, pergolas, patios, decking, fences, guardrails, and sports/athletic courts and fields statewide. Includes incidental concrete, excavation, and asphalt work.
View UT-S330 guideRadon Mitigation Contractor (S-354)
S-354 radon mitigation contractors install radon mitigation systems statewide, including heat recovery ventilation and makeup air components. Electrical work subcontracted to E-200/E-201.
View UT-S354 guideFire Suppression Systems Contractor (S-370)
S-370 fire suppression contractors install fire suppression systems statewide, including connecting to potable sanitary water supply and installing hood suppression above cooking appliances. May subcontract to P-200/P-201 for excluded plumbing work.
View UT-S370 guideBoiler, Pipeline, Waste Water & Water Conditioner Contractor (S-410)
S-410 contractors fabricate and install pipes, conduit, and cables for conveyance of water, steam, gas, chemicals, and slurries; install storage tanks and dispensing equipment; install fire-tube and water-tube boilers and hot water heating boilers; and install sewer, septic, and drainage systems statewide.
View UT-S410 guideSign Installation Contractor (S-440)
S-440 sign installation contractors install signs, graphic displays, and related sign structures statewide. May perform minor incidental electrical work (≤120V, ≤20A, ≤10 ft from existing outlet); other electrical work subcontracted to E-200/E-201.
View UT-S440 guideElevator Contractor (S-510)
S-510 elevator contractors install, repair, and maintain elevators, escalators, dumbwaiters, and moving walks statewide. May hire licensed elevator mechanics as employees.
View UT-S510 guideLimited Scope License Contractor (S-700)
S-700 limited scope contractors perform specialty construction work approved by DOPL that does not fall within another established classification statewide. Scope is defined by Division approval per applicant.
View UT-S700 guideResidential & Small Commercial Non-Structural Remodeling & Repair (R-101)
R-101 contractors remodel or repair existing non-structural residential and small commercial structures statewide. R-101 licensees may not hold any other specialty classification.
View UT-R101 guideReady to License Your Company in Utah?
IQS places pre-vetted Utah qualifying agents or handles full application processing through our partners TLS & TLHQ.
