The agency that doesn't sleep. Call (954) 860-7190 and ask Fiona, our AI assistant, anything, 24/7.

    M-F 9am-5pm EST
    All States/New York
    NY Department of State / NYC Department of Buildings / Local Jurisdictions

    New York Contractor License Classifications

    10 total classifications1 core tiers9 specialty sub-trades

    New York does not license general contractors at the state level — GC licensing is handled at the local level (NYC, Buffalo, Rochester, Albany). In NYC, special trades (electrical, plumbing, oil burner, refrigeration, sprinkler) are licensed by the Department of Buildings. Upstate, electrical, plumbing, and HVAC are regulated locally. Asbestos and lead abatement are licensed by the NY Department of Labor. The complete 10-classification schedule is documented below, split into core license tiers and specialty sub-trades.

    Licensing Model
    Home rule - most fragmented in U.S.
    NY GBL Art. 36-A (VERIFY section); NYSDOL

    What New York Licenses

    No statewide GC license; electrical and plumbing licensed LOCALLY. Statewide home-improvement CONTRACT law only (NY GBL Art. 36-A). New as of Dec 30, 2024: certain contractors (public work plus certain private projects) must register with NYS Dept of Labor ($200/2 yr).

    Where GC Licensing Comes From

    NYC DOB (GC registration) and NYC DCWP (HIC license); county programs in Nassau, Suffolk, Westchester.

    Watch Out — Compliance Trap

    VERIFICATION GAP: the exact GBL Art. 36-A section was not confirmed against a .gov source. NYSDOL registration details are secondary-source - verify.

    Licensing Board

    NY Department of State / NYC Department of Buildings / Local Jurisdictions

    Visit official board website

    Core License Tiers

    1 flagship general/engineering classifications — the primary licenses most New York contractors need.

    LOCAL
    General•Local Jurisdiction (NYC DOB, Buffalo, Rochester, Albany)

    NY-LOCAL — General Contractor — Local Jurisdiction (LOCAL)

    No state GC licensing statute — local jurisdiction authority.

    Height & Stories
    Per local jurisdiction
    Project Scope
    Commercial & Residential
    Financial & Bond
    Per local jurisdiction.
    Subcontracting
    Prime contractor; may subcontract to NY-licensed specialty trades.

    Statutory Scope of Work

    New York has no state-level general contractor license. GC licensing is handled at the local level (NYC, Buffalo, Rochester, Albany). In NYC, general contractors must register with the Department of Buildings. Requirements vary by jurisdiction.

    Experience & Exam Prerequisites

    • Per local city requirements.
    • Exam: Per local jurisdiction

    Qualifier Role

    A NY general contractor qualifier is placed at the local jurisdiction level; IQS places qualifiers familiar with NYC DOB and major upstate jurisdictions.

    Hiring a New York NY-LOCAL Qualifier: A NY general contractor qualifier is placed at the local jurisdiction level; IQS places qualifiers familiar with NYC DOB and major upstate jurisdictions.

    Specialty Sub-Trades

    9 single-trade sub-licenses from the NY Department of State / NYC Department of Buildings / Local Jurisdictions — each covers one specific scope of work.

    ELE

    Electrical Contractor (ELE)

    Installation, alteration, and repair of all electrical systems statewide. In NYC, licensed by the DOB Master Electrician; upstate, regulated locally. NYC requires a Master Electrician license to pull electrical permits.

    View NY-ELE guide
    PLU

    Plumbing Contractor (PLU)

    Installation, alteration, and repair of all plumbing systems including water supply, sanitary drainage, and gas piping statewide. In NYC, licensed by the DOB Master Plumber; upstate, regulated locally.

    View NY-PLU guide
    OIL

    Oil Burner Installer (OIL)

    Installation, service, and repair of oil burner systems including oil storage tanks, burners, and fuel oil equipment in NYC and jurisdictions requiring oil burner licensing statewide.

    View NY-OIL guide
    REF

    Refrigeration Systems Contractor (REF)

    Installation, service, and repair of commercial and industrial refrigeration systems in NYC and jurisdictions requiring refrigeration licensing statewide.

    View NY-REF guide
    HVAC

    HVAC Contractor (HVAC)

    Installation, repair, and maintenance of heating, ventilation, and air conditioning systems statewide. In NYC, HVAC work requiring oil burner or refrigerant handling is licensed by DOB; upstate, regulated locally.

    View NY-HVAC guide
    ROOF

    Roofing Contractor (ROOF)

    Installation, repair, and replacement of roofing systems — shingle, metal, tile, and commercial flat roofing statewide. Regulated locally; no state roofing license.

    View NY-ROOF guide
    ASB

    Asbestos Abatement Contractor (ASB)

    Removal, encapsulation, and abatement of asbestos-containing materials statewide. Licensed by the NY Department of Labor under 12 NYCRR Part 56.

    View NY-ASB guide
    LEAD

    Lead Abatement Contractor (LEAD)

    Removal and abatement of lead-based paint statewide. Licensed by the NY Department of Labor under 12 NYCRR Part 60.

    View NY-LEAD guide
    FIRE

    Fire Sprinkler Contractor (FIRE)

    Installation, repair, and maintenance of fire sprinkler and fire protection systems statewide. In NYC, licensed by the DOB; upstate, regulated locally.

    View NY-FIRE guide

    Ready to License Your Company in New York?

    IQS places pre-vetted New York qualifying agents or handles full application processing through our partners TLS & TLHQ.